Product Description:
IMPORTANT: What to know about glucose alarms
How to use:
You can use the FreeStyle LibreLink app to:
SMARTPHONE COMPATIBILITY
Alarms can only be issued on your FreeStyle Libre 2 reader or your phone (not both).
To receive alarms on your phone, you must start the sensor with the app. To receive alarms on your FreeStyle Libre 2 reader, you must start the sensor with your reader.
Once the sensor has been started with the reader, you can also scan that sensor with your phone.
Applying Your Sensor:
1. Apply Sensors only on the back of your upper arm. Avoid areas with scars, moles, stretch marks, or lumps. Select an area of skin that generally stays flat during your normal daily activities (no bending or folding). Choose a site that is at least 2.5 cm (1 inch) away from an insulin injection site. To prevent discomfort or skin irritation, you should select a different site other than the one most recently used.
2. Wash application site using a plain soap, dry, and then clean with an alcohol wipe. This will help remove any oily residue that may prevent the Sensor from sticking properly. Allow site to air dry before proceeding.
Note: The area MUST be clean and dry, or the Sensor may not stick to the site.
3. Open the Sensor Pack by peeling the lid off completely. Unscrew the cap from the Sensor Applicator and set the cap aside.
CAUTION: Do NOT use if the Sensor Pack or the Sensor Applicator seem to be damaged or already opened. Do NOT use if past expiry date.
4. Line up the dark mark on the Sensor Applicator with the dark mark on the Sensor Pack. On a hard surface, press down firmly on the Sensor Applicator until it comes to a stop.
5. Lift the Sensor Applicator out of the Sensor Pack.
6. The Sensor Applicator is prepared and ready to apply the Sensor.
CAUTION: The Sensor Applicator now contains a needle. Do NOT touch inside the Sensor Applicator or put it back into the Sensor Pack.
7. Place the Sensor Applicator over the prepared site and push down firmly to apply the Sensor to your body.
CAUTION: Do NOT push down on the Sensor Applicator until placed over prepared site to prevent unintended results or injury.
8. Gently pull the Sensor Applicator away from your body. The Sensor should now be attached to your skin.
Note: Applying the Sensor may cause bruising or bleeding. If there is bleeding that does not stop, remove the Sensor, and apply a new one at a different site.
9. Make sure the Sensor is secure after application. Put the cap back on the Sensor Applicator. Discard the used Sensor Pack and Sensor Applicator. See Disposal section.
Starting Your Sensor:
1. Press the Home Button to turn on the Reader.
2. Touch Start New Sensor.
3. Hold the Reader within 4 cm (1.5 inches) of the Sensor to scan it. This starts your Sensor. If sounds are turned on, the Reader beeps when the Sensor has been successfully activated. The Sensor can be used to check your glucose after 60 minutes.
Note: If the Sensor is not successfully scanned within 15 seconds, the Reader displays a prompt to scan the Sensor again. Touch OK to return to the Home Screen and touch Start New Sensor to scan your Sensor.
Checking Your Glucose:
1. Turn the Reader on by pressing the Home Button or touch Check Glucose from the Home Screen.
2. Hold the Reader within 4 cm (1.5 inches) of your Sensor to scan it. Your Sensor wirelessly sends glucose readings to the Reader. If sounds are turned on, the Reader beeps when the Sensor has been successfully scanned. Note: If the Sensor is not successfully scanned within 15 seconds, the Reader displays a prompt to scan the Sensor again. Touch OK to return to the Home Screen and touch Check Glucose to scan your Sensor.
3. The Reader displays your current glucose reading along with your glucose graph and an arrow indicating the direction your glucose is going.
FreeStyle LibreLink – SA
Approved for use with FreeStyle Libre and FreeStyle Libre 2 sensors
The FreeStyle LibreLink app is approved for use with FreeStyle Libre and FreeStyle Libre 2 sensors. Now you can check your glucose by scanning your sensor with your phone or use FreeStyle Libre 2 sensors to receive alarms when your glucose is low or high.
You can use the FreeStyle LibreLink app to:
* View your current glucose reading, trend arrow and glucose history
* Receive low or high glucose alarms with FreeStyle Libre 2 sensors [2]
* See reports, such as Time in Target and Daily Patterns
* Share your data with your doctor and family, with your permission
SMARTPHONE COMPATIBILITY
Compatibility may vary between phones and operating systems. Learn more about compatible phones at http://FreeStyleLibre.com.
USING YOUR APP AND READER WITH THE SAME SENSOR
Alarms can only be issued on your FreeStyle Libre 2 reader or your phone (not both). To receive alarms on your phone, you must start the sensor with the app. To receive alarms on your FreeStyle Libre 2 reader, you must start the sensor with your reader. Once the sensor has been started with the reader, you can also scan that sensor with your phone.
Caution & Warnings:
Contraindications:
WARNING:
Cautions and Important System Information:
What the System has not been evaluated for:
How to store the Sensor:
When is Sensor Glucose different from Blood Glucose:
When to remove the Sensor:
What to know about wearing the Sensor:
What to know about Glucose Alarms:
Interfering Substances:
Product Description:
IMPORTANT: What to know about glucose alarms
How to use:
You can use the FreeStyle LibreLink app to:
SMARTPHONE COMPATIBILITY
Alarms can only be issued on your FreeStyle Libre 2 reader or your phone (not both).
To receive alarms on your phone, you must start the sensor with the app. To receive alarms on your FreeStyle Libre 2 reader, you must start the sensor with your reader.
Once the sensor has been started with the reader, you can also scan that sensor with your phone.
Applying Your Sensor:
1. Apply Sensors only on the back of your upper arm. Avoid areas with scars, moles, stretch marks, or lumps. Select an area of skin that generally stays flat during your normal daily activities (no bending or folding). Choose a site that is at least 2.5 cm (1 inch) away from an insulin injection site. To prevent discomfort or skin irritation, you should select a different site other than the one most recently used.
2. Wash application site using a plain soap, dry, and then clean with an alcohol wipe. This will help remove any oily residue that may prevent the Sensor from sticking properly. Allow site to air dry before proceeding.
Note: The area MUST be clean and dry, or the Sensor may not stick to the site.
3. Open the Sensor Pack by peeling the lid off completely. Unscrew the cap from the Sensor Applicator and set the cap aside.
CAUTION: Do NOT use if the Sensor Pack or the Sensor Applicator seem to be damaged or already opened. Do NOT use if past expiry date.
4. Line up the dark mark on the Sensor Applicator with the dark mark on the Sensor Pack. On a hard surface, press down firmly on the Sensor Applicator until it comes to a stop.
5. Lift the Sensor Applicator out of the Sensor Pack.
6. The Sensor Applicator is prepared and ready to apply the Sensor.
CAUTION: The Sensor Applicator now contains a needle. Do NOT touch inside the Sensor Applicator or put it back into the Sensor Pack.
7. Place the Sensor Applicator over the prepared site and push down firmly to apply the Sensor to your body.
CAUTION: Do NOT push down on the Sensor Applicator until placed over prepared site to prevent unintended results or injury.
8. Gently pull the Sensor Applicator away from your body. The Sensor should now be attached to your skin.
Note: Applying the Sensor may cause bruising or bleeding. If there is bleeding that does not stop, remove the Sensor, and apply a new one at a different site.
9. Make sure the Sensor is secure after application. Put the cap back on the Sensor Applicator. Discard the used Sensor Pack and Sensor Applicator. See Disposal section.
Starting Your Sensor:
1. Press the Home Button to turn on the Reader.
2. Touch Start New Sensor.
3. Hold the Reader within 4 cm (1.5 inches) of the Sensor to scan it. This starts your Sensor. If sounds are turned on, the Reader beeps when the Sensor has been successfully activated. The Sensor can be used to check your glucose after 60 minutes.
Note: If the Sensor is not successfully scanned within 15 seconds, the Reader displays a prompt to scan the Sensor again. Touch OK to return to the Home Screen and touch Start New Sensor to scan your Sensor.
Checking Your Glucose:
1. Turn the Reader on by pressing the Home Button or touch Check Glucose from the Home Screen.
2. Hold the Reader within 4 cm (1.5 inches) of your Sensor to scan it. Your Sensor wirelessly sends glucose readings to the Reader. If sounds are turned on, the Reader beeps when the Sensor has been successfully scanned. Note: If the Sensor is not successfully scanned within 15 seconds, the Reader displays a prompt to scan the Sensor again. Touch OK to return to the Home Screen and touch Check Glucose to scan your Sensor.
3. The Reader displays your current glucose reading along with your glucose graph and an arrow indicating the direction your glucose is going.
FreeStyle LibreLink – SA
Approved for use with FreeStyle Libre and FreeStyle Libre 2 sensors
The FreeStyle LibreLink app is approved for use with FreeStyle Libre and FreeStyle Libre 2 sensors. Now you can check your glucose by scanning your sensor with your phone or use FreeStyle Libre 2 sensors to receive alarms when your glucose is low or high.
You can use the FreeStyle LibreLink app to:
* View your current glucose reading, trend arrow and glucose history
* Receive low or high glucose alarms with FreeStyle Libre 2 sensors [2]
* See reports, such as Time in Target and Daily Patterns
* Share your data with your doctor and family, with your permission
SMARTPHONE COMPATIBILITY
Compatibility may vary between phones and operating systems. Learn more about compatible phones at http://FreeStyleLibre.com.
USING YOUR APP AND READER WITH THE SAME SENSOR
Alarms can only be issued on your FreeStyle Libre 2 reader or your phone (not both). To receive alarms on your phone, you must start the sensor with the app. To receive alarms on your FreeStyle Libre 2 reader, you must start the sensor with your reader. Once the sensor has been started with the reader, you can also scan that sensor with your phone.
Caution & Warnings:
Contraindications:
WARNING:
Cautions and Important System Information:
What the System has not been evaluated for:
How to store the Sensor:
When is Sensor Glucose different from Blood Glucose:
When to remove the Sensor:
What to know about wearing the Sensor:
What to know about Glucose Alarms:
Interfering Substances:
Added to cart
المجموع:
0 ر.س.